All Categories > By Primary Gas to be Measured > Oxygen Analyzers (O2) > Continuous Oxygen Analyzers for Hazardous Locations (O2) > Continuous Process Oxygen Gas Analyzer - 410 Series > Item # Model 410 D1 or D2  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # Model 410 D1 or D2, Model 410 D1 or D2 Oxygen Analyzer with cabinet purge systems for hazardous areas


The Nova 410 Series represent Nova's best value in continuous process O2 analysis. This analyzer utilizes a long-life electrochemical 'fuel cell' sensor for the detection of Oxygen in process gases. The sensor produces a small millivoltage output which is directly proportional to the Oxygen detected. The output is then amplified and displayed on a digital readout meter and can also be sent to an optional recorder output. The 410 can be supplied with sampling pump or pressure regulator to suit most applications.

Cabinet: NEMA 4 cabinet with Hazardous Area Purge System; available for Class 1 Div1 & Div2 hazardous areas.




Specifications  · Applications  · Features  · Options  · Calibration

Specifications

Method of Detection
Customer replaceable electrochemical 'fuel cell' O2 sensor. Expected life 3 to 5 years depending on typical measurement concentrations.

Ranges Available
Any range from 0-2.0% to 0-100.0% O2

Resolution
0.1% O2

Accuracy & Repeatability
Below 30% O2 ±1% of full scale; above 30% O2 ±2% of full scale

Drift
Less than 2% of full scale per month

Response Time (T-90)
6-8 seconds to 90% step change

Ambient Temperature Range
32 to 122°F (0 to 50°C), Lower temperatures (-5°F, -20°C) with Cold Weather Package

Linearity
Below 30% O2 ±1% of full scale; above 30% O2 ±2% of full scale

Size & Weight
Dimensions will vary depending on type of cabinet purge required
NEMA 4: 51H x 41W x 26D cm (20"H x 16"W x 10"D)

Power
115 VAC, 60 Hz
220 VAC, 50 Hz

Output Options
4-20 mA into 500 ohms non-isolated standard
Isolated 4-20 mA, RS232, RS485, MODBUS, Ethernet outputs

Alarms
High and/or Low alarm contacts available, relay contacts SPDT 5A @ 220 VAC rating
Low flow alarm

Analyzer Type
O2 Analyzer

Primary Gas(es) to be Measured
Oxygen (O2)

Hazardous Area Rating Options
Class 1 Div 2 or Class 1 Div 1 Hazardous Area Ratings available


Applications
      For continuous analysis of oxygen (O2) in process gas streams. Also recommended for other applications such as O2 enrichment of combustion air, flue gas analysis, oxygen deficiency analysis, and many more.


Features
  • Best value continuous O2 analyzer
  • Bright digital readout
  • Long life electrochemical O2 sensor
  • Fast response (T90 - 6 to 8 seconds)
  • Microprocessor control for push button calibration
  • Easy-to-maintain modular layout
  • Built in sample pump or pressure regulator
  • 4-20mA outputs


Options
  • Hi/Low gas, low flow, and diagnostic alarms available
  • Isolated analog, RS232, RS485, MODBUS, and Ethernet outputs available
  • Light-duty sample conditioning available for removal of moisture and dust
  • Cabinet purge system available for use in hazardous areas
  • Cabinet cooling for areas not air-conditioned
  • Sensors mounted in temperature controlled heated box to improve accuracy
  • High temperature filters and probes


Calibration
  • Nitrogen for zero
  • Air or analyzed calibration gas for span


 MORE IMAGES 

·  Application process


 DOWNLOADS 

410 FlexiNova O2 Analyzer21
(PDF, 575KB)