All Categories > Multigas Analyzers > Item # 5000 Series  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 5000 Series, Portable Flue Gas Analyzer for Any Combination of O2, CO, CO2, NOx, SO2and Stack Temperature


The Nova 5000 Series Portable Flue Gas analyzer has been designed for accuracy, reliability, ease of use and ease of service, providing a detailed analysis of flue gas composition. The 5000 uses customer replaceable sensors which respond quickly to the O2, CO2, SO2, CO, and NOx (as NO) present in the flue gas sample. The O2 sensor life expectancy is typically 3-4 years. The CO, SO2, and NOx sensor life is typically 2-3 years. The infrared CO2 sensor should not need to be replaced under normal conditions of use.
In operation, a built in sample pump draws in the flue gas sample through the stainless steel probe, 12ft. sample house, water separating filter, secondary filter, PTFE liquid blocker and flow meter then on to the gas sensors. The detected O2, CO2, SO2, CO, and NOx are displayed on separate large LCD meters with switchable backlights for use in dark areas. Optional with the Nova 5000 Series is a stack temperature reading.
A rechargeable 'gel cell' battery provides enough power for about 4-5 hours of continuous operation and the analyzer can be used while it is being recharged. A red LED tells when to recharge and a green LED verifies that it is receiving recharging power. The Model 5000 series case is rugged, dust and water resistant when closed. A built in printer, which also shows date and time, is optionally available. A built in data logger is also available which can be uploaded to a PC.




 Specifications   Applications   Features   Options   Calibration   

Method of Detection
Customer replaceable electrochemical O2, CO, SO2, and NO sensors
Solid state infrared detector for CO2

Ranges Available
0-1800°F (0-1000 °C) net stack temperature
0-20.00% CO2
0-200 or 0-2000 PPM NOx (as NO or NO + NO2)
0-200 or 0-2000 PPM SO2
0-25.0 % O2
0-9999 PPM CO

Resolution
±0.1% CO2, 1 PPM, 1°F (1°C)

Accuracy & Repeatability
±10 PPM for all gases
0.1%

Drift
<2% full scale per 8 hours of continuous operation

Response Time (T-90)
< 30 seconds for 90% of O2, CO2, CO and SO2, < 60 seconds for 90% NO

Ambient Temperature Range
Operating : 32 to 122°F (0 to 50°C);
Sample : Up to 1200°F (635°C) (standard probe)

Linearity
±1% of full scale for each gas measured

Power
12 V battery operation, 115 VAC, 60 Hz for recharging
220 VAC, 50 Hz

Output Options
0-1 V for each gas measured. RS232 or RS485, printer
4-20 mA

Primary Gas to be Measured
Carbon Monoxide (CO)
Oxygen (O2)

Industry Type
Flue Gas or Emissions


 MORE IMAGES 

·  Application flue gas


 DOWNLOADS 

5000 Portable Flue Gas Analyzer
(PDF, 578KB)