All Categories > By Primary Gas to be Measured > Oxygen Analyzers (O2) > Portable Oxygen Analyzers (O2) > Portable Paramagnetic Oxygen Analyzer - 322 Series > Item # 322BT  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 322BT, Portable Paramagnetic Oxygen Analyzer, Benchtop (BT) Enclosure


The Nova 322 Portable Paramagnetic Analyzer is designed to measure the oxygen concetration of clean, dry sample gas.  A built-in pressure regulator reduces any positive sample pressure.  A built-in sample pump may be switched on to draw in the sample gas when it is at or slightly below atmospheric pressure.  An external gas scrubber is available if required, to remove any corrosive gases prior to entering the analyzer.

In operation, the incoming sample gas passes through sample conditioning filters and the flow meter, then into the O<sub>2</sub> sensor.  The paramagnetic sensor utillizes a magneto-dynamic measuring cell and powerful selenium cobalt magnet assembly combined with on-board amplification, temperature compensation and barometric pressure compensation.  This cell makes use of the principle that O<sub>2</sub> is drawn into a magnetic field, thereby increasing the turning force on a diamagnetic body suspended in the field.  Very few other gases respond this way, making this method specific to O<sub>2</sub>.  The Model 322 can be used for any O<sub>2</sub> measurement between 0-100 as long as the sample gas is clean, dry and non-corrisive.




Specifications  · Applications  · Features  · Options  · Calibration  · Unique Applications

Specifications

Method of Detection
Magneto-dynamic paramagnetic O2 cell

Ranges Available
Any range from 0-2.0% to 0-100.0% O2

Resolution
0.1% O2

Accuracy & Repeatability
Model 322BT: ± 1% of full scale; Model 322HABT: ± 0.5% of full scale

Drift
± 0.5% of full scale per month

Response Time (T-90)
4-6 seconds

Ambient Temperature Range
0-50 ºC
32-122 ºF

Linearity
Model 322BT: ± 1% of full scale; Model 322HABT: ± 0.5% of full scale

Size & Weight
8" W x 9" H x 10" D @ 12 lbs (20 x 23 x 25 cm @ 5.5kg)

Power
AC/DC Operation, 115 VAC 60 Hz for recharging (Other voltages available)

Output Options
4-20mA or 0-1V (optional)

Alarms
One high or one low O2 alarm (optional)

Hazardous Area Rating Options
General Purpose, Non-Hazardous


Applications
For continuous high accuracy analysis of oxygen O2 in process gas streams or other applications such as combustion air O2 enrichment, O2 defficiency analysis and many more.


Features
  • High accuracy paramagnetic O2 cell, very stable
  • Fast response (T90-4 to 5 seconds)
  • Bright digital readout
  • Linear over entire 0-100% range
  • Non-consumable O2 cell, no periodic replacement required
  • Built-in sample pump or pressure regulator
  • To improve accuracy, cell is compensated for changes in barometric pressure
  • Bench Top (BT) enclosure is standard


Options
  • Isolated or non-isolated recorder outputs of 4-20mA
  • Sample pre-cooler for hot samples
  • Condensate removal for wet applications
  • High or low O2 alarms
  • Detachable/portable datalogger
  • Sensors temperature-controlled for maximum stability


Calibration
  • Analyzed calibratin gas of O2 free nitrogen (N2) for zero
  • Air at 20.9% O2 or analyzed calibration gas of O2 in N2 for span


Unique Applications
All Nova analyzers are built using proven technologies and techniques. If this product does not suit your application, please contact Nova. In many cases, we are able to build an analyzer specific to your needs.


 DOWNLOADS 

322 Series Portable Paramagnetic Oxygen Analyzer
(PDF, 632KB)