Print Back
The Nova 312 Series Portable Flue Gas Analyzer for NOx utilizes a reliable, stable nitric oxide (NO) sensor which responds quickly to the NO present in flue gases or engine exhaust. NO is the major component (90-95%) of the NOx found in flue gases or engine exhaust (except diesel).

In operation, a built in sample pump draws in the gas sample through the S.S. probe, 12 ft sample hose, condensate removal filter, secondary filter and flowmeter then on to the NO sensor. The detected NO is displayed on a LCD digital meter which has a switchable backlight for use in dark areas.

The rechargeable battery provides enough power for about 20 hours of continuous operation and the analyzer can be used while it is being recharged. A red LED tells when to recharge and a green LED verifies that it is receiving recharging power. The recharger is included.
Unit of Measure

Specifications

Method of Detection

N/A Customer replaceable electrochemical NO sensor

Ranges Available

N/A 0-2000 PPM NOx (as NO)

Resolution

N/A 1 PPM NO

Accuracy & Repeatability

N/A Better than 2% full scale

Drift

N/A Within 1% full scale per 8 hours of continuous operation

Response Time (T-90)

N/A 20-30 seconds for 90% of step change

Ambient Temperature Range

N/A 12 to 49 ºC55 to 120 ºF

Linearity

N/A ±2% of full scale

Size & Weight

N/A K Style: 14"L x 10 1/2" W x 6" H @ 12 lbs ( 36 x 27 x 15 cm @ 5.5 kg) WP Style: 11 1/2" L x 8" W x 7 1/4" H @ 8 lbs (29 x 20 x 18 cm @ 3.6 kg)

Power

N/A AC/DC Operation, 115 VAC, 60 Hz for recharging (220 VAC 50Hz available)

Output Options

N/A 4-20 mA or 0-1 VDC

Alarms

N/A NOx alarms with LED

Unique Applications

N/A Note: For proper operation, the sample gas should also contain a small amount of oxygen.

All Nova analyzers are built using proven technologies and techniques. If this product does not suit your application, please contact Nova. In many cases, we are able to build an analyzer specific to your needs.

Primary Gas to be Measured

N/A Oxides of Nitrogen (NOx)

Industry Type

N/A Flue Gas or Emissions

Applications

N/A

    Analysis of oxides of nitrogen (NOx) as nitric oxide (NO) for boiler, furnace, or engine exhaust.

Features

N/A

  • Rugged design that is easy to operate and maintain
  • Fast warm-up and response
  • Disposable, long life electrochemical NO sensor
  • Digital readout meter with backlight
  • Rechargeable battery operation
  • Built in sample pump, filter and flow meter
  • Active condensate removal
  • Rapid recovery on NOx overdose
  • Stainless steel probe with sample hose

Options

N/A

  • Recorder outputs of 0-1 V or 4-20 mA
  • Stack temperature readout (312T)
  • Special sampling probes
  • Sample pre-cooler
  • Suitcase (K) style cabinet available
  • AC power only operation
  • NOx alarms with LED
  • Detachable/portable datalogger

Calibration

N/A

  • Air for zero
  • Analyzed calibration gas mixtures of PPM NO in air for span.