Nova Analytical Systems
Canada
270 Sherman Avenue N.
Hamilton, ON L8L 6N5
Phone: (905) 545 2003• Fax: (905) 545 4248
Email: sales@nova-gas.com or websales@nova-gas.com United States
1925 Pine Avenue
Niagara Falls, NY 14301
Phone: (716) 285-0418 • Fax: (716) 282-2937
Print Back
The Nova 360 Series are portable analyzers that can provide a detailed analysis of flue gas composition. They have been designed to be accurate, reliable, and easy to use and maintain. The sensors respond quickly to the oxygen and carbon monoxide (CO) present in the flue gas sample. The typical sensor life expectancy is between 3-4 years and they are customer-replaceable.

In operation, a built-in sample pump draws in the flue gas sample through the S.S. probe, 12 ft. sample hose, condensate removal filter, secondary filter and flow meter, then on to the three sensors. The detected O2 and CO are displayed on separate LCD digital meters, which have a switchable backlight for use in dark areas. A special water separating filter and separate drain pump continuously remove condensate fro teh sample so the analyzer can be operated fro long periods unattended.

The Nova 360T indicates net stack temperature for doing fuel efficiency calculations. The temperature sensor is built into the sampling probe. Efficiency charts for each fuel are provided.

A rechargeable 'gel cell' battery provides enough power for about 16 hours of continuous operation and the analyzer can be used while it is being recharged. A red LED indicates when to recharge and a green LED verifies that it is receiving recharging power. The charger is included with the analyzer.  The rugged dust-tight and water resistant case is suitable for use in harsh environments.
Unit of Measure

Specifications

Method of Detection

 N/A Customer replaceable electrochemical O2 and CO sensors

Ranges Available

 N/A 0-1800°F (0-1000°C) net stack temperature 0-25.0% O2; 0-2000 PPM to 0-4.00% CO (switch selectable)

Resolution

 N/A 0.1% O2, 1 PPM CO

Accuracy & Repeatability

 N/A ±1% of O2, ± 1 PPM CO

Drift

 N/A ±1% of full scale per 8 hours of continuous operation

Response Time (T-90)

 N/A 5-8 seconds for O2 and CO

Ambient Temperature Range

 N/A 0 to 40 ºC32 to 105 ºF

Linearity

 N/A ±1% of full scale of each gas measured

Size & Weight

 N/A Suitcase (K) Style: 14" L x 10 1/2" W x 6" H @ 12 lbs (36 x 27 x 15cm @ 5.5 kg) Weatherproof (WP) Style: 10" L x 7 1/2" H x 8" D @ 8 lbs (25 x 19 x 20 cm @ 3.6 kg)

Power

 N/A AC/DC Operation, 115 VAC 60 Hz for recharging (Other voltages available)

Output Options

 N/A 4-20 mA or 0-1 VDC

Alarms

 N/A High CO alarm with LED

Unique Applications

 N/A All Nova analyzers are built using proven technologies and techniques. If this product does not suit your application, please contact Nova. In many cases, we are able to build an analyzer specific to your needs.

Primary Gas to be Measured

 N/A Flue Gas or Emissions

Industry Type

 N/A Steel Making

Applications

N/A

    Analysis of oxygen (O2) and carbon monoxide (CO). For checking combustion efficiency, air infiltration, and burner & control performance of furnaces, heaters and, boilers. May be used in commercial, industrial and residential settings.

Features

N/A

  • Rugged design that is easy to operate and maintain
  • Fast warm-up and response
  • Digital readout meter with backlight
  • Rechargeable battery operation
  • Built in pump, filter, flow meter, and continuous condensate removal
  • Weatherproof (WP) cabinet with clear Lexan cover
  • Stainless steel probe with sample hose
  • For use on any fuel
  • Long life detector cells for O2 and CO (customer replaceable)
  • Dual CO range: 0-2000 PPM and 0-4.00% CO
  • Rapid CO reading recovery on CO 'overdose'
  • Pays for itself in months through fuel savings

Options

N/A

  • Recorder outputs of 0-1 V or 4-20 mA
  • stack temperature readout (360T)
  • Special sampling probes
  • Sample pre-cooler
  • Suitcase (K) style cabinet available
  • AC power only operation, with HD sample pump
  • High CO alarm with LED
  • Detachable/portable data logger

Calibration

N/A

  • Air for O2 span and CO zero
  • Analyzed mixture of CO in nitrogen for CO span and O2 zero