New Call-to-action
Request Information
The 7460 Series Portable Analyzers are available in six versions for the simultaneous measurement of the gases typically found in the exhaust from internal combustion engines. CO, CO2, and HC's are detected by a dual-wavelength infrared detector. O2 and NOx (as NO) are detected by customer-replaceable electrochemical sensors. If NO2 analysis is selected, this is also by electro-chemical sensor.

All detector outputs are displayed on separate front panel digital meters. Optional built in printer, data logger and 4-20 mA recorder outputs are also available.

The 7460 Series Analyzers come complete with built in sampling pump, flow meter, automatic condensate removal, filters, PTFE liquid block, 12 ft. (4 m) sampling hose, and stainless steel probe. Also included are a cigarette lighter socket and remote printer actuator button for printer based models.
Unit of Measure

Method of Detection

 N/A CO (low-range), NO, NO2 and O2 by long life electrochemical sensor. CO (standard range), CO2, and HC by infrared detector

Ranges Available

 N/A 0-10.00% CO (special low range PPM CO available) 0-20.0% CO2 0-2000 PPM NOx (as NO) 0-2000 to 0-20,000 PPM HC's (as propane or hexane) 0-25.0% O2 0-800 PPM NO2

Resolution

 N/A 0.1% on % gas, 1 PPM on PPM gas

Accuracy & Repeatability

 N/A ±1% of full scale for O2, CO, CO2 and HC's ±2% of full scale for NOx

Drift

 N/A <±1% in 8 hours after full warmup

Response Time (T-90)

 N/A 8-10 seconds

Ambient Temperature Range

 N/A 0 to 40 ºC

Linearity

 N/A ±1.0% of full scale each gas measured

Size & Weight

 N/A K Style - Approx. 14" W x 6" H x 10 1/2" D (35.5 x 15.2 x 26.6 cm), 12 lbs (5.5 kg)

Power

 N/A 115 VAC, 50/60 Hz for recharging 12 VDC for cigarette lighter socket 220 VAC, 50/60 Hz for recharging

Output Options

 N/A 0-1 VAC 4-20 mA Isolated 4-20 mA, RS232, RS485

Unique Applications

 N/A
    All Nova analyzers are built using proven technologies and techniques. If this product does not suit your application, please contact Nova. In many cases, we are able to build an analyzer specific to your needs.

Primary Gas to be Measured

 N/A Carbon Monoxide (CO)

Industry Type

 N/A Engine Exhaust

N/A

    For checking engine exhaust emissions for diesel, gasoline, propane, or natural gas powered 2 and 4 cycle engines. Analysis of Carbon Monoxide (CO), Hydrocarbons (HC’s), Carbon dioxide (CO2), Oxygen (O2), Oxides of Nitrogen (NOx), Nitric Oxide (NO), and Nitrogen dioxide (NO2).

N/A

  • Rugged design that is easy to operate and maintain
  • Fast warm up and accurate response
  • Large digital readouts with back light for each gas
  • Simple to operate, compact size
  • Solid state infrared detectors for CO, CO2, and HC's
  • Rechargeable battery operation (recharge from vehicle or from AC adapter)
  • Provided with sample filter, and flexible sample probe with 12 ft. of hose, built in sample pump and automatic condensate removal
  • Meets Bar 97 and OIML specifications
  • Suitcase (K) style cabinet

N/A

  • Analog 4-20 mA outputs
  • Built in printer (add 'P' suffix)
  • Data logger for PC computer
  • Add NO (as NO) to any analyzer (add 'N' suffix)
  • Add NO2 to any analyzer (add 'X' suffix)
  • PPM CO in place of '%' (add 'L' suffix)
  • Bench top (BT) style cabinet
  • Wallmount version with active condensate removal (QN4)

N/A

  • Zero on air
  • Span on blended gases. NO and NO2 blend to be separate.
View Our
Product Catalog
Have a question?
Contact Us
Ready to get started?
Request Quote