Method of Detection |
N/A O2 and H2S by electrochemical sensor, CH4 & CO2 by infrared detector |
Ranges Available |
N/A 0-25.0% O2; any range between 0-50.0% to 0-100.0% CH4, CO2; 0-200 to 0-2,500 PPM H2S; 0-1000 BTU |
Resolution |
N/A 0.1% on CO2, O2, & CH4, 1 PPM H2S, 1 BTU |
Accuracy & Repeatability |
N/A ±1% of full scale for O2 / CO2 / CH4 |
Drift |
N/A Less than 2% of full scale per month |
Response Time (T-90) |
N/A Less than 30 seconds not including sample line delay |
Ambient Temperature Range |
N/A 40 to 104°F (4 to 40°C). Optional: -20°C to 55°C (-4°F to 131°F) with Outdoor Pkgs. |
Linearity |
N/A ±1% of full scale for each gas measured |
Size & Weight |
N/A Approx. 24" H x 24" W x 10" D @ 90 lbs (61 x 61 x 25 cm @ 41 kg) Physical data may vary depending on options required |
Power |
N/A 115 VAC 60 Hz (220 VAC 50 Hz available) |
Output Options |
N/A Isolated 4-20 mA standard RS232, RS485, MODBUS®, Ethernet outputs optional |
Alarms |
N/A Available: High O2, high CO2, low CH4, low flow; SPDT relays with 10A contacts |
Analyzer Type |
N/A Landfill Gas Analyzer |
Primary Gas(es) to be Measured |
N/A O2 / CO2 / CH4 / H2S |
Hazardous Area Rating Options |
N/A Class 1 Div 1 or Class 2 Div 2, using purge system General Purpose Non-Hazardous Areas |
N/A For continuous analysis of oxygen (O2), methane (CH4), and/or carbon dioxide (CO2) in recovered gases from biogas applications. Hydrogen sulfide (H2S) readout optional. |
N/A
|