Nova Analytical Systems
Canada
270 Sherman Avenue N.
Hamilton, ON L8L 6N5
Phone: (905) 545 2003• Fax: (905) 545 4248
Email: sales@nova-gas.com or websales@nova-gas.com United States
1925 Pine Avenue
Niagara Falls, NY 14301
Phone: (716) 285-0418 • Fax: (716) 282-2937
Print Back
The Nova 375 Series Portable Flue Gas Analyzers have been designed for accuracy, reliability, ease of use and ease of service, providing a detailed analysis of flue gas composition. The sensors respond quickly to oxygen, CO2, and CO present in the flue gas sample. The O2 and CO sensor life expectancy is between 3 and 4 years. The CO2 infrared detector life is infinite under normal conditions of use, unless contaminated. The O2 and CO sensors are customer-replaceable. The infrared CO2 detector should not need to be replaced.

In operation, a built-in sample pump draws in the flue gas sample through the S.S. probe, 12 ft. (4 m) sample hose, condensate removal filter, secondary filter and flow meter and then on to the three sensors. The detected O2, CO2 and CO are displayed on a digital meter.

The Nova 375T version also indicates stack temperature for doing fuel efficiency calculations. The temperature sensor is built into the sampling probe. Efficiency charts for each fuel are provided.

A rechargeable battery provides enough power for about 8 hours of continuous operation and the analyzer can be used while it is being recharged. The recharger is included.
Unit of Measure

Specifications

Method of Detection

 N/A Customer replaceable electrochemical oxygen and CO sensors Solid state infra-red detector for CO2

Ranges Available

 N/A 0-1800°F (0-1000°C) stack temperature 0-20.0% CO2 0-2000 PPM and 0-4.00% CO - Switch selectable 0-25.0% Oxygen

Resolution

 N/A 0.1% O2, 1 PPM on CO and CO2

Accuracy & Repeatability

 N/A 2% of full scale for O2 and CO2; ±10 PPM CO

Drift

 N/A <2% full scale per 8 hours of continuous operation

Response Time (T-90)

 N/A 10-15 seconds for O2; 20-30 seconds for CO and CO2

Ambient Temperature Range

 N/A 0 to 40 ºC32 to 105 ºF

Linearity

 N/A ±1.0% of full scale for each gas measured

Size & Weight

 N/A approx. 26 x 18 x 13 cm @ 3.4 kg (10" x 7" x 5" @ 7.5lbs)

Power

 N/A 115VAC 60Hz for recharging (220VAC 50Hz available)

Output Options

 N/A 4-20mA

Hazardous Area Rating Options

 N/A General Purpose, Non-Hazardous

Applications

N/A

        Analysis of oxygen (O
2
        ), carbon monoxide (CO), and carbon dioxide (CO
2
      ). For checking the combustion efficiency and burner & control performance of furnaces, heaters, and boilers. May be used in commercial, industrial, and residential settings.

Features

N/A

  • Rugged design that is easy to operate
  • Fast warm up and response
  • CO2 actually measured by infrared detector, not calculated
  • Rapid reading recovery after CO 'overdose'
  • Digital readout meter
  • Modular design that is easy to maintain
  • Rechargeable battery operation
  • Built in sample pump, filter and flow meter
  • Active condensate removal
  • Suitcase cabinet (K) is weatherproof
  • Stainless steel probe with sample hose

Options

N/A

  • Outputs 4-20mA
  • Stack temperature readout (375T)
  • Special sampling probes
  • Suitcase (K) style cabinet available
  • Data logging to USB stick

Calibration

N/A

  • Air for O2 span and CO/CO2 zero
  • Analyzed gas mixtures of CO2 and CO in nitrogen for span

Unique Applications

N/A

    The 375 Series should not be used for detecting these gases in ambient atmospheres for personnel safety purposes. All Nova analyzers are built using proven technologies and techniques. If this product does not suit your application, please contact Nova. In many cases, we are able to build an analyzer specific to your needs.