In operation, a built-in sample pump draws in the flue gas sample through the S.S. probe, 12 ft sample hose, condensate removal filter, secondary filter and flow meter then on to the O2 sensor and CO2 detector. The detected gases are displayed on a digital meter.
The 309 can optionally indicate stack temperatrue (309T) for doing fuel efficiency calculations. The temperature sensor is built into the sampleing probe. Efficiency charts for each fuel are provided.
A rechargeable battery provides enough power for about 8 hours of operation and the analyzer can be used while it is being recharged. Recharger is included.
Specifications
Method of Detection |
N/A Infrared detector for CO2 Long life electrochemical O2 sensor |
Ranges Available |
N/A 0-20% CO2 (other ranges available) 0-25% O2 |
Resolution |
N/A 0.1% O2 and CO2 |
Accuracy & Repeatability |
N/A Within ±2% full scale |
Drift |
N/A Within 1% full scale per 8 hours of continuous operation |
Response Time (T-90) |
N/A O2 less than 10 seconds; CO2 less than 30-40 seconds to T-90 |
Ambient Temperature Range |
N/A 4 to 49 ºC40 to 120 ºF |
Linearity |
N/A ±1.0% of full scale |
Size & Weight |
N/A approx. 26 x 18 x 13 cm @ 3.4 kg (10" x 7" x 5" @ 7.5lbs) |
Power |
N/A 115 VAC / 60 Hz for recharging (220VAC / 50Hz also available.) |
Output Options |
N/A 4-20mA |
Hazardous Area Rating Options |
N/A General Purpose, Non-Hazardous |
Applications
|
N/A Analysis of Carbon Dioxide (CO2) and Oxygen (O2). For checking combustion efficiency, burner & control performance of furnaces, heaters and boilers in commercial, industrial and residential applications. |
Features
|
N/A
|
Product Catalog
Contact Us
Request Quote
