Nova Analytical Systems
Canada
270 Sherman Avenue N.
Hamilton, ON L8L 6N5
Phone: (905) 545 2003• Fax: (905) 545 4248
Email: sales@nova-gas.com or websales@nova-gas.com United States
1925 Pine Avenue
Niagara Falls, NY 14301
Phone: (716) 285-0418 • Fax: (716) 282-2937
Print Back
The Nova Model 7900P Series Heat Treat analyzers utilize a three channel high stability infrared detector for the simultaneous measurement of CO, CO2, and CH4 in exothermic or endothermic gas mixtures. In addition, the analyzer can be supplied with a fully compensated thermal conductivity cell for H2. A separate O2 detector can also be supplied for measuring low (PPM) or percent levels of oxygen in the atmosphere gas stream. Dew point is detected by a dielectric ceramic sensor and is available in standard and low ranges. All detected gases have a separate LCD digital readout and a linear recorder output. The customer may choose any combination of gases to be measured.

The 7900P series analyzers are complete with integral sampling pump, rechargeable battery, filters, flow meter, and sampling hose. Solenoid valves are used to isolate low range dew point and O2 sensors during purges and when analyzer is not in use to prevent ambient air contamination of the sensors and greatly reduce purge time during start-up.
Unit of Measure

Specifications

Method of Detection

 N/A Customer may select one or more combinations of CO, CO2, H2, CH2, O2, or dew point

Ranges Available

 N/A 0-10% , 0-100.0% CH4 0-10,000 PPM, 0-50.0% O2 0-100% NH3 0-2.00% , 0-100.0% CO2 0-20.0%, 0-100.0% CO 0-40.0%, 0-100.0% H2 -10 to +80°F(-23 to +26°C) Dew Point -148 to +68°F(-100 to +20°C) Dew Point

Resolution

 N/A 0.1% on % versions, 10 PPM on PPM versions

Accuracy & Repeatability

 N/A ±1% of full scale

Drift

 N/A ±0.5 % of full scale in 8 hours.

Response Time (T-90)

 N/A Approximately 20-30 seconds to 90% step range, following warm-up

Ambient Temperature Range

 N/A 0 to 50 ºC32 to 122 ºF

Linearity

 N/A ±1% of full scale for each gas measured

Size & Weight

 N/A 10" H x 10" W x 14" D (25 x 25 x 35 cm) @ Approx. 20 lbs (9 kg) Physical data may vary depending on model and options selected

Power

 N/A 115 VAC, 60 Hz 220 VAC, 50 Hz

Output Options

 N/A 4-20 mA for each gas measured. 0-1 VDC or serial output also available

Primary Gas to be Measured

 N/A Carbon Monoxide (CO)

Industry Type

 N/A Heat Treating Atmospheres Steel Making

Applications

N/A

    For monitoring heat treating atmosphere gases in any combination of carbon monoxide (CO), carbon dioxide (CO2), methane (CH4), hydrogen (H2), oxygen (O2) and dew point. Also available for other industrial processes that include hydrogen.

Features

N/A

  • Best value H2-based multi-gas portable analyzer
  • Fast warm up and response time
  • Long life thermal conductivity cell for H2 cannot be burned out due to loss of flow
  • Long life electrochemical O2 sensor
  • Sensitive infrared detectors for CO, CO2, and CH4
  • H2 reading compensated for presence of CO, CO2and CH4
  • Fast response ceramic dew point sensor
  • Bright LED digital readouts
  • Modular layout that is easy to maintain.
  • Rechargeable battery operation
  • Built-in sample pump, flow meter and filters
  • Rugged bench top (BT) style cabinet
  • Solenoid valves used to isolate low range dew point and O2 sensors during sample purge and transportation to prevent ambient air contamination

Options

N/A

  • Recorder outputs of 0-1 V or 4-20 mA (can be isolated)
  • Condensate removal for wet applications
  • Suitcase (K) style cabinet available
  • AC power operation
  • Carbon potential calculation with CO, CO2 and CH4 channels
  • Sensor mounted in temperature controlled heated box for improved accuracy (AC only)
  • LCD digital readouts with backlight

Calibration

N/A

  • Analyzed calibration gas mixture to span all readings.