For checking lower range dew points of air, hydrogen/nitrogen atmospheres, or other dry process gases.

For checking dew points of at atmospheric pressure of air, heat treat furnace gases, compressed air lines and other application with oils or contaminants present.

For boiler or furnace flue gas analysis where a continuous oxygen analyzer already exists, but carbon monoxide (CO) must still be measured.

Analysis of Oxides of Nitrogen (NOx) as Nitric Oxide (NO). For boiler, furnace, or engine exhaust.

Analysis of propane or gasoline vapors from a closed vessel.

Analysis of Oxygen (O₂). For checking combustion efficiency, air infiltration, and burner & control performance of furnaces, heaters and, boilers. May be used in commercial, industrial and residential settings.

Analysis of Oxygen (O₂) concentration in industrial process gas or purging and blanket gases.

For high accuracy analysis of trace PPM oxygen (O₂) in non-corrosive process gas.

For continuous high accuracy analysis of oxygen (O₂) in process gas streams or other applications such as combustion air (O₂) enrichment, (O₂) defficiency analysis and many more.

For analysis of Hydrogen (H₂) in a binary gas mixture in process gases such as H₂ in air, H₂ in Nitrogen (N₂), H₂ in Carbon Dioxide (CO₂), H₂ in Argon (Ar), H₂ in Oxygen (O₂), etc.

Analysis of Oxides of Nitrogen (NOx) such as Nitric Oxide (NO) and/or Nitrogen Dioxide (NO₂). For boiler, furnace, or engine exhaust monitoring and analysis.

For spot-check measurements of oxygen (O2), carbon monoxide (CO), carbon dioxide (CO2), oxides of nitrogen (NO & NO2), and sulfur dioxide (SO2) emissions. For check combustion efficiency, and burner & control performance on furnaces, heaters, and boilers. May be used in commercial, industrial, and residential settings.

For spot-checking engine exhaust emissions for diesel, gasoline, propane, or natural gas powered 2 and 4 cycle engines. Analysis of carbon monoxide (CO), hydrocarbons (HC’s), carbon dioxide (CO2), oxygen (O2), nitric oxide (NO), nitrogen dioxide (NO2), and sulfur dioxide (SO2).

For monitoring heat treating atmosphere gases in any combination of Carbon Monoxide (CO), Carbon Dioxide (CO₂), Methane (CH₄), Hydrogen (H₂), Oxygen (O₂) and dew point. Also available for other industrial processes that include hydrogen.

For monitoring syngas and gasification atmospheres or other industrial process gases in any combination of carbon monoxide (CO), carbon dioxide (CO2), methane (CH4), hydrogen (H2), and oxygen (O2).

The Nova 970P Series Syngas analyzers utilize a durable field cleanable three channel high stability infrared detector for the simultaneous measurement of CO, CO2, and CH4 in challenging applications such as syngas and gasification atmospheres. In addition, the analyzer can be supplied with a fully compensated thermal conductivity cell for H2. Electrochemical O2 sensor can also be supplied for measuring percent levels of oxygen in the sample gas stream. Recorder outputs are optional. The customer may choose any combination of gases to be measured.

Ranges Available:
0 - 2.0 %, 0 - 25.0 %, 0 - 50.0 % O2
0 - 2.0 %, 0 - 50.0 % CO
0 - 2.0 %, 0 - 50.0 % CO2
0 - 2.0 %, 0 - 50.0 % CH4
0 - 2.0 %, 0 - 50.0 % H2

Optional Ranges:
0 - 100.0 % CO
0 - 100.0 % CO2
0 - 100.0 % CH4
0 - 100.0 % H2