Continuous analysis of flue gas for any combination and range of O₂, CO, CO₂, SO₂, NOx (NO or NO + NO₂) or combustibles from combustion processes.

For continuous monitoring of any combination of heat treat atmosphere gases such as Oxygen (O₂), Methane (CH₄), Carbon Dioxide (CO₂), Carbon Monoxide (CO), Hydrogen (H₂), Ammonia (NH₃), and Dew Point (standard and low ranges). Also available for other industrial process gases.

Designed for the continuous monitoring of O₂, CO, CO₂, and/or H₂ gases from blast furnaces or other continuous industrial processes where an uninterrupted stream of gas concentration data is critical. Calculated values of BTU, N₂ and efficiency are also available.

For continuous monitoring of syngas and gasification atmospheres or other industrial process gases for any combination of methane (CH₄), carbon dioxide (CO₂), carbon monoxide (CO) and hydrogen (H₂) and oxygen (O ₂).

For continuous analysis of Oxygen (O₂), Methane (CH₄), and/or Carbon Dioxide (CO₂) in recovered gases from landfill sites.

For continuous analysis of oxygen (O2), methane (CH4), and/or carbon dioxide (CO2) in recovered gases from biogas applications. Hydrogen sulfide (H2S) readout optional.

Standard Models:

920 - O2
921 - CH4
922 - O2 and CH4
923 - CO2 and CH4
924 - O2, CH4, and CO2

Available Ranges:

Oxygen:  0-25.0%
Carbon Dioxide: any range between 0-50.0% to 0-100.0%
Methane: any range between 0-50.0% to 0-100.0%

Optional:

H2S: 0-200 to 0-2,500 PPM
BTU: 0-1000