Canada
270 Sherman Avenue N.
Hamilton, ON L8L 6N5
Phone: (905) 545 2003• Fax: (905) 545 4248		 United States
1925 Pine Avenue
Niagara Falls, NY 14301
Phone: (716) 285-0418 • Fax: (716) 282-2937
 
Email: sales@nova-gas.com or websales@nova-gas.com
All Categories > By Primary Gas to be Measured > Carbon Monoxide Analyzers (CO) > Portable Carbon Monoxide Analyzers & Testers (Portable CO Analyzers) > Portable Flue Gas Carbon Monoxide Analyzer - 310 Series > Item # Model 310K  


Item # Model 310K, Portable Flue Gas Analyzer for Carbon Monoxide, Suitcase (K) Enclosure

The Nova 310 Series Portable Flue Gas CO Analyzer utilizes a reliable, customer-replaceable electrochemical sensor which responds quickly to the CO present in the flue gas sample. Its life expectancy is between 3 and 4 years.

In operation, a built-in sample pump draws in the flue gas sample through the probe, sample house, condensate removal filter, secondary filter, flow meter, and then on to the CO detector. The detected CO is displayed on a digital meter.

A rechargeable battery powers the pump and electronics. The analyzer can still be operated while it is being charged. The analyzer is supplied with approximately 12 ft. (4 m) of sample hose and a short stainless steel tube probe.





Specifications  · Applications  · Features  · Options  · Calibration  · Unique Applications

Specifications

Method of Detection
Customer replaceable electrochemical CO sensor

Ranges Available
0-200 up to 0-9999 PPM CO

Resolution
1 PPM in PPM range

Accuracy & Repeatability
Better than 1% of full scale, based on a 0-2000 PPM range

Drift
Less than 1% full scale per month

Response Time (T-90)
20-30 seconds

Ambient Temperature Range
0 to 50 ºC
32 to 122 ºF

Linearity
Better than 1.0% of full scale

Size & Weight
approx. 26 x 18 x 13 cm @ 3.4 kg (10" x 7" x 5" @ 7.5lbs)

Power
115 VAC / 60 Hz for recharging (220 VAC / 50 Hz available)

Output Options
4-20mA

Analyzer Type
CO analyzer

Hazardous Area Rating Options
General Purpose, Non-Hazardous


Applications
    For boiler or furnace flue gas analysis where a continuous oxygen analyzer already exists, but carbon monixode (CO) must still be measured.


Features
  • Rugged design that is easy to operate and maintain
  • Fast warm-up and response
  • Disposable, long life electrochemical CO sensor
  • Rechargeable battery operation
  • Use on flue gas from any fuel
  • Choice of ranges: 0-200 up to 0-9999 PPM CO
  • Built in sample pump, filter and flowmeter
  • Condensate removal
  • Rapid reading recovery after CO 'overdose'
  • Stainless steel probe with sample hose


Options
  • Recorder output - 4-20mA
  • Stack temperature readout
  • Special sampling probes
  • Sample pre-cooler
  • Suitcase (K) style cabinet
  • On-board data logging to USB stick


Calibration
  • Air for zero
  • Analyzed calibration gas mixture of PPM CO in nitrogen for span.


Unique Applications
    All Nova analyzers are built using proven technologies and techniques. If this product does not suit your application, please contact Nova. In many cases, we are able to build an analyzer specific to your needs.



Print Back