Canada
270 Sherman Avenue N.
Hamilton, ON L8L 6N5
Phone: (905) 545 2003• Fax: (905) 545 4248		 United States
1925 Pine Avenue
Niagara Falls, NY 14301
Phone: (716) 285-0418 • Fax: (716) 282-2937
 
Email: sales@nova-gas.com or websales@nova-gas.com
All Categories > By Primary Gas to be Measured > Oxygen Analyzers (O2) > Portable Oxygen Analyzers (O2) > Portable PPM Oxygen Analyzer - 325 Series > Item # Model 325BT  


Item # Model 325BT, Portable PPM Oxygen Analyzer

The Nova 325 Portable Trace Oxygen Analyzer is designed for accurately measuring trace PPM oxygen in clean, dry sample gas.

The customer replaceable electrochemical sensor produces a small output current directly proportional to the amount of O2 in the sample and is capable of measuring trace PPM levels of O2 in any range from 0-100 to 0-9999 PPM. The lowest readable level is 1 PPM.

Bypass solenoid valves are used to trap low PPM oxygen in the O2 cell to avoid exposure to ambient air. This allows for a rapid purge down and also protects the cell from momentary over exposure to high O2 levels.

A flow control valve and flow meter are provided for regulating the flow of samples under positive pressure. A built-in sample pump is provided for use on samples under atmospheric or slight negative pressure.

A rechargeable battery provides enough power for the pump and electronics for about 20 hours of continuous opertion. The analyzer may still be operated while it is being charged. A red LED indicates when to recharge the analyzer and a green LED indicates that it is receiving recharging power. The battery recharger is included with the analyzer.





Specifications  · Applications  · Features  · Options  · Calibration  · Unique Applications

Specifications

Method of Detection
Low range electrochemical O2 sensor

Ranges Available
0-100 PPM to 0-9999 PPM O2

Resolution
1 PPM

Accuracy & Repeatability
±2% of reading

Drift
±1% of full scale per week

Response Time (T-90)
O2 sensor may require an initial purge down from air to low PPM O2, which may last up to 6 hours. After purge down, T-90 response from 1000 to 100 PPM is 30 seconds.

Ambient Temperature Range
0-50 ºC
32-122 ºF

Linearity
±2% of full scale

Size & Weight
8" W x 9 1/2" H x 10" D @ 12 lbs. (20 x 23 x 25 cm @ 5.5 kg)

Power
AC/DC operation. 115 VAC 60 Hz for recharging (Other voltages available)

Output Options
0-1V or 4-20mA (optional)

Alarms
One high or low O2 alarm (optional)

Hazardous Area Rating Options
General Purpose, Non-Hazardous


Applications
For high accuracy analysis of trace PPM oxygen (O2) in non-corrosive process gas.


Features
  • Rugged design that is light weight, compact and easy to operate
  • Fast warm-up and response
  • Accurately measures PPM O2 in gases including those containing hydrocarbons
  • any range between 0-100 to 0-9999 PPM available
  • Customer replaceable electrochemical 'fuel cell' O2 sensor
  • Blocking solenoid valves used to trap PPM O2 in cell for quick purge down and also protects cell during initial sample line purge
  • Comes complete with flow control valve, filters and flow meter
  • Digital meter readout with backlight
  • Rechargeable battery operation


Options
  • Recorder outputs of 0-1V or 4-20 mA
  • Sampel pre-cooler for hot samples
  • Condensate removal for wet applications
  • Built-in sample pump or pressure regulator
  • AC only power operation
  • O2 alarm with LED
  • Detachable data logger
  • Type 'K' suitcase style cabinet


Calibration
  • Analyzed calibration gas of O2 free nitrogen N2 for zero
  • Analyzed calibrationg gas of PPM O2 in N2 for span


Unique Applications
The PPM O2 sensor in Model 325 can be affected by the presence of other gases such as H2S.

All Nova analyzers are built using proven technologies and techniques. If this product does not suit your application, please contact Nova. In many cases, we are able to build an analyzer specific to your needs.



Print Back