All Categories > By Primary Gas to be Measured > Oxygen Analyzers (O2) > Continuous Oxygen Analyzers (Continuous O2 Analyzers) > Continuous Heat Treat Atmosphere and Industrial Process Gas Analyzer Systems - 7900 Series > Item # Model 7903C  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # Model 7903C, Continuous Heat Treat Atmosphere and Industrial Process Gas Analyzer, Carbon Monoxide, Carbon Dioxide, & Oxygen



The Nova 7900 Series Heat Treat Analyzers are designed for the continuous monitoring of various combinations of gases such as oxygen (O2), methane (CH4), carbon dioxide (CO2), carbon monoxide (CO), and hydrogen (H2) for industrial processes including heat treating atmospheres.

Standard Cabinet: Wall Mounted NEMA4 (IP65) Enclosure Rating

Detection Technologies:
O2 - long-life electrochemical sensor
CO - non-consumable, long-life infrared detector
CO2 - non-consumable, long-life infrared detector
CH4 - non-consumable, long-life infrared hydrocarbons detector
H2 - non-consumable, long-life thermal conductivity cell; available with internal compensation for interference effects from CO, CO2, and CH4

Model 7903C: O2, CO and CO2






Specifications  · Applications  · Features  · Options  · Calibration  · Unique Applications

Specifications

Method of Detection

Electrochemical sensor for O2; NDIR infrared detector for CO, CO2

Ranges Available

0 - 2,000 PPM to 0 - 25.0% O2; 0 - 1.00%, 0 - 30.0% CO; 0 - 1.00%, 0 - 50.0% CO2

Resolution

0.1%

Accuracy & Repeatability

±1% of full scale on all gases

Drift

Less than 2% of full scale per month

Response Time (T-90)

20-30 seconds to 90% step change

Ambient Temperature Range

32 to 122°F (0 to 50°C), Lower temperatures (-5°F, -20°C) with Cold Weather Package

Linearity

±1% of full scale

Size & Weight

Physical data will vary depending on model and enclosure required

Power

115 VAC, 60 Hz
220 VAC, 50 Hz

Output Options

4-20 mA into 500 ohms non-isolated standard
Isolated 4-20 mA, RS232, RS485, MODBUS, Ethernet outputs

Alarms

High and/or low alarm contacts available, relay contacts SPDT 5A @ 220 VAC rating
Low flow alarm

Analyzer Type

O2, CO and CO2 Analyzer

Hazardous Area Rating Options

General Purpose, Non-Hazardous


Applications
    For continuous monitoring of any combination of heat treat atmosphere gases such as Oxygen (O2), Methane (CH4), Carbon Dioxide (CO2), Carbon Monoxide (CO), Hydrogen (H2), Ammonia (NH3), and Dew Point (standard and low ranges). Also available for other industrial process gases.




Features
  • Best value multi-gas analyzer including hydrogen
  • Sensitive infrared detectors for CO, CO2, CH4, and NH3 temperature controlled where necessary to reduce drift
  • Thermal conductivity detector for hydrogen
  • Long life (2-5 years) electrochemical oxygen sensor, PPM and % ranges available
  • Dielectric ceramic sensor for standard or low range dew point
  • Bright digital display for each gas
  • Built in sample pump or pressure regulator
  • Microprocessor for push button calibration
  • Easy to maintain modular layout




Options
  • Hi/Low gas, low flow, and diagnostic alarms available
  • Isolated analog, RS232, RS485, MODBUS, and Ethernet outputs available
  • Sample conditioning systems available for removal of moisture, acidic gas, and dust
  • Cabinet purge system available for use in hazardous areas
  • One-step 'cal-now' button with touch screen LCD display
  • Full automatic calibration with touch screen LCD display
  • Cold weather package for operation to -5°F (-20°C)
  • Cabinet coolers can be fitted to most models
  • High temperature filters and probes
  • Sensors mounted in temperature controlled heated box to improve accuracy




Calibration
  • Ambient air for O2 span and other gases zero
  • Analyzed calibration gas with representative concentrations of non-O2 gases for span




Unique Applications
    Special models of the 7900 Series analyzers can be supplied with options such as free standing cabinets, built-in moisture removal systems, cabinet coolers, controllers, hi/low alarms, low flow alarm, 4-20 mA outputs, recorders, etc. All Nova analyzers are built using proven technologies and techniques. If this product does not suit your application, please contact Nova. In many cases, we are able to build an analyzer specific to your needs.



 MORE IMAGES 

·  Application heat treat


 DOWNLOADS 

7900 Series Multi-Gas Heat Treat Analyzers
(PDF, 667KB)